HTC Vive Unboxing & Hands-On First Look With VR!
What’s the HTC Vive like? We find out…
I’ll level with you, I can be a bit of a cynic when it comes to new tech; I didn’t think much of smartwatches, and still don’t, and there are all kinds of comparable fads which just don’t sit right with me. Stuff people don’t want or need, new ideas which just don’t seem fully fleshed out. The reason I’m saying this is because for me Virtual Reality (VR) is NOT one of these technologies. I’ve been a gamer since my early teens and have long wondered about how a true VR experience might be quite liberating for gaming in all genres, so it’s pretty exciting stuff for me that we’re now at the beginning of the VR era.
I think it is the next big thing, I think it’s here to stay, even if there is a long way to go and what we’re looking at right now is tantamount to awkward, clumsy baby steps – and that’s not a criticism describing the current devices in this way, just like baby steps these first forays into VR, however flawed, are absolutely a necessary part of the process in order to figure out what works, and as importantly, what doesn’t.
So with all that said, you can understand I was rather excited, but also quite nervous, about the prospect of testing the HTC Vive VR headset. Undoubtedly the HTC Vive has captured public attention more than any other VR headset to date, with the possible exception of the headset that really started it all; the Oculus Rift, although I’d say they’re probably on a fairly even footing in terms of prominence.
What follows is a sort of after-action report of my unboxing and setting up the HTC Vive for the first time. This is my first experience with VR too (assuming you don’t count a brief demo with Google Glass), so I was pretty keen to see what all the fuss was about. For our VR tomfoolery ASUS UK was kind enough to lend us an Asus Republic Of Gamers G20AJ gaming PC tower, a PC powerful enough to handle the HTC Vive with its Intel Core i7 processor and NVIDIA GTX970 GPU.
That is really the first thing to observe about the Vive though, you do need a pretty powerful PC to run it at even the minimum required specs.
Anyway, with the PC set up I took delivery of the HTC Vive review sample and was surprised by the size of the box it came in. Opening this cardboard box showed that the device was contained inside another box; this the actual retail packaging rather than the protective one for it to be courired inside. Thing is, the retail box isn’t much smaller, considering what I was expecting the box is MASSIVE! With the lid popped off I quickly understood why. There’s a LOT of parts and components to the HTC Vive. This was going to be fun to set up. And by fun, I mean…not.
As well as the Vive headset itself, which comes festooned with cables and with a selection of velcro-attached pads to fit around your eyes, the package contains two box-shaped sensors (about the size of small speakers), two wireless hand-held controllers (which look like weird hollow ladle things), and multiple plugs, chargers, docks, adaptors, and cables of all kinds; microUSB, USB, HDMI, power and more.
When you break it down it’s not so bad though, there’s a central “hub” thing which you plug power into, as well as USB and HDMI cables from the PC, then from this hub you plug in the headset’s own power, USB, and HDMI cables. The box-shaped motion sensors are positioned in the corners of the room and will help track your movement; they each have their own power cable. Meanwhile, each of the hand-held controllers has its own microUSB charger to get it juiced up. You’re going to need a lot of free power sockets, I’ll tell you that. The headset also has a 3.5mm headphone jack, as headphones aren’t integrated so you can provide your own if you wish – a pair of standard earpods are included in the box though.
The “quick setup” instructions claim you can get everything running in 30 minutes. I guess maybe this is possible if you are lucky, but it wasn’t my experience and, for the record, I’m not bad with PCs and built my current gaming tower myself. But this is the thing with peripherals, and the Vive, though a complicated one, is a peripheral device, effectively a second monitor – sometimes they play up. If the machine gods don’t line things up in your favour, for no apparent reason, things can just go awry. Of course, not catastrophically, necessarily; I got things working eventually, but it took a good couple of hours of faffing to get it all running properly.
Be prepared to faff.
What’s more, there’s no CD for the software install, you need to go to the Vive website and download a setup program, which will itself download and install both the HTC Vive software and Valve’s Steam platform for games if you don’t already have it. This in itself can take some time, depending on your connection speed; I found it kept dropping out the download over Wi-Fi but once I wired things up with an ethernet cable to my fibreoptic broadband it worked like a charm.
What I also found is it’s best to set the Vive up with an additonal monitor, as effectively a dual-monitor setup. The Vive likes to be plugged directly into your GPU via HDMI, but this can be troublesome for some parts of the setup process, such as configuring the “room” sensors, if you don’t have an additonal monitor set up either via another HDMI port or PC-RGB. Incidentally, this also means the Vive is better if you have an “audience” of curious friends and family members, as people viewing the monitor can see what you’re seeing inside the headset.
Calibrating the headset, controllers, and sensors to your “play area” is also a bit of a faff, but an understandbaly necessary one. You need to get the sensors to be able to “see” the controllers and headset so movement can be tracked accurately, and there’s also a stage involving putting the headset and controllers on a surface or the floor so that the system sets up depth properly, ie: where the floor inside virtual reality should be. You can opt for either “full room” or “seated” setups, the former being more complicated to set up, and the latter being aimed at those who, like me, are in a smaller space and sat in front of a desk.
To be completely honest my “play area” was less than ideal, with not much accessible floor space and a lot of nearby obstacles, walls and other things which I did indeed find myself banging into on a fairly regular basis during my playtesting. What’s more, these obstacles also caused actual playability issues by blocking the hand controllers from the sensors on occasion, it wasn’t at all unusual for one or the other of my virtual in-game “hands” to just freeze or float off because the sensor just lost track. You really do need a pretty clear open space to get the most out of the HTC Vive, in my view.
- Check Out Our Pick Of The BEST VR Games For The HTC Vive & Oculus Rift
Anyway, onto the in-game experience. I downloaded a handful of titles for testing, including theBlu, Spell Fighter, Universe Sandbox, and Google’s Tiltbrush painting software, all of which I found highly enjoyable in their own way. It must be said that the immersive feeling of being “present” in VR is pretty phenomenal, and difficult to describe.
I would say what I found most enjoyable was theBlu and Universe Sandbox, simply because the graphics were so well polished and they were fairly “static” experiences where things unfolded around you. The immersion was not so easily broken in these titles as they were somewhat more abstract, but in all cases it is true that immersion suddenly dissipates, if only briefly, the moment some 3D model passes through your face and you see it for what it is.
You’re also aware of the lack of a sense of inertia in motion or touch when reaching out to an object – this isn’t a criticism, I’m not expecting the Vive to be able to give this kind of feedback, but what I am saying is that, just as people say when you are blind you become more aware of your other senses, I think VR quickly makes you aware by stimulating certain senses that other important ones are not being catered to, and that can be immersion breaking.
Regardless, standing in the middle of space or under the ocean was pretty damn breathtaking it must be said.
One other point about inertia, particularly in less-static games; I had been aware that some people get motion sickness in VR and I think this did affect me slightly – I had to take the headset off and have a lie down at one point. This was only really an issue in Spell Fighter which did require you to move around and act within the game world.
So far developers have essentially figured out two ways of adding movement into VR games, the first involves a “teleportation” system where you point at a location with the controller and click to move there, while the second is using the trackpad on the controller as a D-Pad to control directonal movement, just as you would with arrow keys or WASD on a keyboard in a first-person shooter.
The teleportation can be problematic because it isn’t too immersive and is also open to exploitation inside game worlds, even inadvertently, as you warp around all over the place often dodging baddies just by trying to position yourself.
The trackpad walking, while more immersive, is where the motion sickness can occur, because your body isn’t getting the tactile and inertia feedback it expects from walking around, this messes with the brain – your body doesn’t feel like it’s going anywhere but your eyes perceive that you are.
There are basically two workarounds for this movement dilemma currently in development, the first involves a number of manufacturers working on omni-directional treadmill controllers you would need to install in your home – large, bulky, and likely expensive devices aimed to allow you to walk, run, crouch and crawl on the spot; some of these solutions look better than others – but we bet you good money none of them will be cheap!
If more games implement this it could be problem solved, but it would mean most Vive users would need a third controller. Perhaps later on some kind of VR Onesie could solve this problem neatly? Until this facet is tackled completely the best games and experiences on the Vive seem to be the static ones, as soon as you add proper movement to the mix, while there’s a hurdle on how to implement it, things go a bit wonky.
So what’s my overall impression so far? I must say I am impressed, the HTC Vive is fun and it’s an excellent starting point for accessible VR. It’s not perfect, there is some faff and there are practical setup considerations to take into account – I don’t think I would describe it as “plug and play”. What’s more, as with any tech of this kind it is only as good as the software made for it – fortunately there’s a lot of momentum and innovation amongst the scores of developers creating content for the Vive right now – things are going to get much better and probably very soon too, I reckon.
I think the future is pretty bright for the Vive, I believe we’re going to see much more interesting and immersive titles in the coming months and years, as well as refinements to the technology, whether a Vive 2 headset or third-party accessories (probably both), which will improve things even further.